1. State in container – No hard block and it is uniform after mixing.
2. Viscosity, (KU) – ≥40
3. Fineness，(μm) – ≤30
4. Solid content, (%) – ≥40
5. Drying time, (h) – Touch dry ≤6
Hard dry ≤24
7. Bending test, (mm) – ≤2
8. Impact resistance, (cm) – ≥40
9. Cross-cut test, (grade) – ≤1
10. Storage stability， （50±2℃，14d）- Normal
11. Water resistance (24h) – Normal
1.Application method: Brush coating, roller coating or air spraying.
2.Application instructions:
-Coating equipment should be kept clean, dry and non-pollution, not mixed with oil, debris, organic solvents, paint blocks etc.
– Before painting, the paint should be mixed evenly. if the viscosity is too high, proper amount of water can be added. The amount of water should not exceed 15% , It should be added while stirring to ensure the uniform paint.
– Before coating the lower coating, the front coating should be dry, at least 24h apart.
-One spray should not be too thick. The thickness of wet film should not exceed 100μm.
-It is strictly prohibited to mix with other coatings and organic solvents.
-Please remember cover the unused paint and keep it tightly.
