1. Appearance –A yellowish-brown transparent liquid without mechanical impurities
2. Viscosity (S) (TU-4# cup)–60-150
3. Solids (105℃/2h) (%)–48±2
4. Acid value (mg koH/g)–≤10
5. Drying time (h, baking at 105+2℃)–≤0.5
6. Dielectritic Strength (KV/mm,）–
normal state：≥70
after 24 hours of soaking in water：≥40
7. Oil resistance (0# 10# transformer oil, after 24 hours of soaking)–PASS
8. Heat resistance (105+2℃/0.5h)–Crack resistant up to 3mm bending.
1. Before paint mixing, all the appliances and tools should be dry and have no oil stains, paint blocks or other foreign matters.
2. Before dipping, remove foreign matters such as oil stains, water and dust from the substrate surface.
3. Apply the paint through dip-coating, flow coating or brush coating. It is suggested to select dip-coating for a good insulation effect.
4. Containers must be kept tightly closed when not used.
5. After application, clean all the tools with a thinner to avoid damage.