Quality standard: GB/T 25263-2010
1. Color and appearance of the paint film–Compliant with the standard board and its color difference range, flat and smooth
2. Fineness (μm) (≤ )–40
3. Drying schedule (h ) (≤ )–Touch dry: 1; hard dry: 8
4. Gloss (%) (≥)–70 or negotiable
5. Covering power (g/m2)(≤)–White or other light colors: 160; other colors: negotiable
6. Content of non(≥)–volatile matters (%)–45
7. Bending test (mm)(≤)–10
8. Alkali resistance (48h)–Normal
9. Adhesion (level)(≤)–2
1. Supporting products: chlorinated rubber paint thinner, chlorinated rubber primer, epoxy primer, etc.
2. Mixing ratio: Determine it according to the actual conditions.
3. Application method: Spraying (main) or brushing
4. Application instructions: Make sure the previous layer of paint film is dry and there is no any foreign matter such as dust, oil, water, acid or alkali on the previous layer of paint film. The substrate should have a temperature more than 3℃ higher than the dew point and a relative humidity of or lower than 85%. It is suggested to spray or brush two layers with an interval longer than six hours (temperature: 25℃) and make the dry paint film thickness of each layer larger than 70 μm. Workplace must be sufficiently ventilated during application and curing. Wear protective gear to avoid contact with the paint and inhalation of the solvent or the paint mist; pay attention to fire safety.